Owners Manual

Table 3. Firewall parameters (continued)
Parameter # Parameter data
● 7—minute
● Date 8:13—Stop time
● [8:9]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 10—month
● 11—date
● 12—hour
● 13—minute
Remove drop all Ipv4 or IPv6 with
timeout rule
20 Add iptables rules to block IPv4 and IPv6
traffic to the BMC. The state selector is
not used.
● Data1: Protocol
● Bit 7:2—Reserved
● Bit 1—IPv6
● Bit 0—IPv4
● Date 2:7—Start time
● [2:3]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 4—month
● 5—date
● 6—hour
● 7—minute
● Date 8:13—Stop time
● [8:9]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 10—month
● 11—date
● 12—hour
● 13—minute
Add IPv6 address with timeout rule
21 Data 1:16—IPv6 address
● MS-byte first. The IPv6 address type
blocked or unblocked based on the
state.
● Date 7:22—Start time
● [17:18]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 19—month
● 20—date
● 21—hour
● 22—minute
● Date 23-28—stop time
● [23:24]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 25—month
● 26—date
● 27—hour
● 28—minute
Configuration methods 23