Owners Manual

IPMI commands
NOTE: All commands are subject to change as the ipmi commands evolve over time.
● ipmi raw
● ipmi i2c
● ipmi ian print
● ipmi ian set
● ipmi ian alert
● ipmi chassis status
● ipmi chassis selftest
● ipmi chassis power status
● ipmi chassis power up / on
● ipmi chassis power down / off
● ipmi chassis power cycle
● ipmi chassis identify
● ipmi chassis poh
● ipmi chassis restart_cause
● ipmi chassis policy list
● ipmi chassis policy always-on
● ipmi chassis policy previous
● ipmi chassis policy always-off
● ipmi chassis bootparam get <param #>
● ipmi chassis bootparam set bootparam set bootflag <device>
○ Legal devices are:
○ none : No override
○ force_pxe : Force PXE boot
○ force_disk : Force boot from default hard-drive
○ force_safe : Force boot from default hard-drive, request Safe Mode
○ force_diag : Force boot from diagnostic partition
○ force_cdrom : Force boot from CD/DVD
○ force_bios : Force boot into BIOS setup
○ Legal options are:
○ help : Print this message
○
PEF : Clear valid bit on reset/power cycle caused by PEF
○ timeout : Automatically clear boot flag valid bit on timeout
○ watchdog: Clear valid bit on reset/power cycle caused by watchdog
○ reset : Clear valid bit on push button reset/soft reset
○ power : Clear valid bit on power up via power push button or wake event
○ Any Option may be prepended with no- to invert sense of operation
● ipmi chassis bootdev <device> bios
● ipmi event <num>
● ipmi event file <filename>
● ipmi event event<sensorid><state> [event_dir]
● ipmi mc reset <warm | cold>
● ipmi mc guid
● ipmi mc info
● ipmi mc watchdog get
● ipmi mc watchdog reset
7
IPMI commands 35