Install Guide

● S5212F-ON and S5296F-ON—USB male-female extension cable
● Switch:
○ S5212F-ON—Standard one-half rack unit
○ S5224F-ON—Standard one rack unit
○ S5232F-ON—Standard one rack unit
○ S5248F-ON—Standard one rack unit
○ S5296F-ON—Standard two rack units
Physical dimensions
The S5200F-ON Series switch have the following physical dimensions:
● S5212F-ON—one-half rack unit:
○ 7.87 x 16 x 1.72 inches (W x D x H)
○ 199.8 x 406.4 x 43.6 mm (W x D x H)
● S5224F-ON, S5232F-ON, S5248F-ON—one rack unit:
○ 17.1 x 18.1 x 1.72 inches (W x D x H)
○ 434 x 460 x 43.6 mm (W x D x H)
● S5296F-ON—two rack units:
○ 16.6 x 20.1 x 3.42 inches (W x D x H)
○
422 x 511 x 87 mm (W x D x H)
LED display
The S5200F-ON Series switch includes LED displays on the I/O side of the switch. This section describes open networking
installation environment (ONIE) LED behaviors. Some LED behaviors may change after you install your software.
LED behavior
The S5200F-ON Series switch LED behavior is seen during ONIE operations.
The S5232F-ON switch LEDs:
12
S5200F-ON Series switch