Install Guide

Table Of Contents

About this guide

This guide provides site preparation recommendations, step-by-step procedures for rack mounting and desk mounting your

switch, inserting modules, and connecting to a power source.

CAUTION: To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this

equipment.

NOTE: Only trained and qualified personnel can install this equipment. Read this guide before you install and power up this

equipment. This equipment contains two power cords. Disconnect both power cords before servicing.

NOTE: This equipment contains optical transceivers, which comply with the limits of Class 1 laser radiation.

Figure 1. Class 1 laser product tag

NOTE: When no cable is connected, visible and invisible laser radiation may emit from the aperture of the optical

transceiver ports. Avoid exposure to laser radiation. Do not stare into open apertures.

Regulatory

● Marketing model S5232F-ON is represented by the regulatory model E21W and the regulatory type E21W005.

● Marketing model S5248F-ON is represented by the regulatory model E21W and the regulatory type E21W002.

● Marketing model S5224F-ON is represented by the regulatory model E21W and the regulatory type E21W003.

● Marketing model S5296F-ON is represented by the regulatory model E26W and the regulatory type E26W001.

● Marketing model S5212F-ON is represented by the regulatory model E29W and the regulatory type E29W001.

Topics:

• Related documents

• Information symbols