Install Guide

Specifications
This section lists the S5200F-ON Series (S5232F-ON, S5248F-ON, S5296F-ON, S5224F-ON, and S5212F-ON) switch
specifications.
CAUTION: Operate the product at an ambient temperature not higher than 45°C (113°F).
CAUTION: Lithium battery Caution: There is a danger of explosion if the battery is incorrectly replaced.
Replace only with same or equivalent type of battery. Dispose of the batteries according to the manufacturer's
instructions.
NOTE: For RoHS information, see Restricted Material Compliance.
Topics:
• Chassis physical design
• IEEE standards
• Agency compliance
• USA Federal Communications Commission statement
• European Union EMC directive conformance statement
• Japan VCCI compliance for class A equipment
• Korean certification of compliance
• Safety standards and compliance agency certifications
• Electromagnetic compatibility
• Product recycling and disposal
Chassis physical design
Table 7. Chassis physical design
Parameter Specifications
Height
S5232F-ON: 1.72 inches (43.6 mm)
S5248F-ON: 1.72 inches (43.6 mm)
S5296F-ON: 3.42 inches (87 mm)
S5224F-ON: 1.72 inches (43.6 mm)
S5212F-ON: 1.72 inches (43.6 mm)
Width
S5232F-ON: 17.1 inches (434 mm)
S5248F-ON: 17.1 inches (434 mm)
S5296F-ON: 16.6 inches (422 mm)
S5224F-ON: 17.1 inches (434 mm)
S5212F-ON: 7.87 inches (199.8 mm)
Depth
S5232F-ON: 18.1 inches (460 mm)
S5248F-ON: 18.1 inches (460 mm)
S5296F-ON: 20.1 inches (511 mm)
S5224F-ON: 18.1 inches (460 mm)
8
Specifications 57