Setup Guide

Specifications

This section lists the S5200F-ON Series switch specifications.

CAUTION: Operate the product at an ambient temperature not higher than 45°C (113°F).

CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace only

with same or equivalent type of battery. Dispose of the batteries according to the manufacturer's instructions.

NOTE: For RoHS information, see Restricted Material Compliance.

Topics:

• Chassis physical design

Chassis physical design

Table 1. Chassis physical design

Parameter Specifications

Height

S5232F-ON: 1.72 inches (43.6 mm)

S5248F-ON: 1.72 inches (43.6 mm)

S5296F-ON: 3.42 (87 mm)

S5224F-ON: 1.72 inches (43.6 mm)

S5212F-ON: 1.72 inches (43.6 mm)

Width

S5232F-ON: 17.1 inches (434 mm)

S5248F-ON: 17.1 inches (434 mm)

S5296F-ON: 16.6 inches (422 mm)

S5224F-ON: 17.1 inches (434 mm)

S5212F-ON: 7.87 inches (199.8 mm)

Depth

S5232F-ON: 18.1 inches (460 mm)

S5248F-ON: 18.1 inches (460 mm)

S5296F-ON: 20.1 inches (511 mm)

S5224F-ON: 18.1 inches (460 mm)

S5212F-ON: 16 inches (406.4 mm)

Chassis weight with factory-installed components

S5232F-ON: 21.6 lbs (9.8 kg)—PSUs and fans

S5248F-ON: 21.4 lbs (9.7 kg)—PSUs and fans

S5296F-ON: 33.3 lbs (15.1 kg)—PSUs and fans

S5224F-ON: 21.4 lbs (9.7 kg)—PSUs and fans

S5212F-ON: 10.05 lbs (4.5 kg)—PSUs and fans

Rack clearance required

Front: 5 inches (12.7 cm)

Back: 5 inches (12.7 cm)

Specifications 23