Connectivity Guide

21 Dell EMC Networking OS10 Enterprise Edition Switch Configuration Guide for VxRail featuring S5248F-ON,
S5232F-ON and S5148F-ON
6 Switch configuration prerequisites
6.1 Check switch OS version
S5148F-ON switches must be running OS10EE version 10.4.1.1 or later. Run the show version command
to check the OS version. Dell EMC recommends upgrading to the latest release available on
Dell Digital
Locker (account required).
OS10# show version
S5148F-ON# show version
Dell EMC Networking OS10-Enterprise
Copyright (c) 1999-2018 by Dell Inc. All Rights Reserved.
OS Version: 10.4.1.1
Build Version: 10.4.1.1.507
Note: Figure 1
at the beginning of this guide lists supported switches and operating systems for VxRail
deployments.
6.2 Verify license installation
Run the command show license status to verify license installation. The License Type: field should
indicate PERPETUAL. If an evaluation license is installed, licenses purchased from Dell EMC are available for
download on Dell Digital Locker. Installation instructions are provided in the
OS10 Enterprise Edition User
Guide Release 10.4.1.0.
OS10# show license status
System Information
---------------------------------------------------------
Vendor Name : Dell EMC
Product Name : S5148F-ON
Hardware Version: A00
Platform Name : x86_64-dellemc_s5100_c2538-r0
PPID : CN00Y2VTCES0082O0038
Service Tag : D8MSG02
License Details
----------------
Software : OS10-Enterprise
Version : 10.4.1.1
License Type : PERPETUAL
License Duration: Unlimited
License Status : Active
License location: /mnt/license/D8MSG02.lic
---------------------------------------------------------
Note: If OS10EE was factory installed, a perpetual license is already on the switch.