Deployment Guide

Command mode EXEC
Usage
information
Use the show evpn vrf l3-vni command to display the configuration settings of each tenant VRF
with its unique VXLAN VNI. Use the show evpn vrf command to display the tenant VRF instances
used to exchange BGP EVPN routes in VXLANs.
Example
OS10# show evpn vrf l3-vni
VRF : vrf_30, State : up
L3-VNI : 3030
Route-Distinguisher : 1:80.80.1.1:3030(auto)
Route-Targets : 0:200:268438486(auto) both
Remote VTEP : 4.4.4.4
VRF : vrf_40, State : up
L3-VNI : 4040
Route-Distinguisher : 1:80.80.1.1:4040(auto)
Route-Targets : 0:200:268439496(auto) both
Remote VTEP : 4.4.4.4
VRF : vrf_50, State : up
L3-VNI : 5050
Route-Distinguisher : 1:80.80.1.1:5050(auto)
Route-Targets : 0:200:268440506(auto) both
Remote VTEP : 4.4.4.4
OS10# show evpn vrf
VXLAN-VNI EVI Virtual-Network-Instance VRF-Name
30 30 30 vrf_30
40 40 40 vrf_40
OS10# show evpn vrf l3-vni vrf_30
VRF : vrf_30, State : up
L3-VNI : 3030
Route-Distinguisher : 1:80.80.1.1:3030(auto)
Route-Targets : 0:200:268435557(auto) both
Remote VTEP : 4.4.4.4
Supported
releases
10.5.1.0 or later
show evpn vxlan-vni
Displays the VXLAN overlay network for EVPN instances.
Syntax
show evpn vxlan-vni [vni]
Parameters vni — (Optional) Enter the VXLAN virtual-network ID, from 1 to 16,777,215.
Default Not configured
Command mode EXEC
Usage
information
Use this command to verify the VXLAN virtual network and bridge domain used by an EVPN instance.
Example
OS10# show evpn vxlan-vni
VXLAN-VNI EVI Bridge-Domain
100 65447 65447
Supported
releases
10.4.2.0 or later
214 BGP EVPN for VXLAN