Deployment Guide

Parameters vtep-ip-address — (Optional) Enter the IP address of a remote VTEP.
Default Not configured
Command mode EXEC
Usage
information
Use the show evpn router-mac remote-vtep command to display the router MAC address used
on the switch and on specified remote VTEPs. Use the router-mac command to create a local router
MAC address. The show evpn router-mac command displays the local router mac and router mac of all
remote VTEPs. The show evpn router-mac remote-vtep [vtep-ip-address] command displays router mac
of specified remote VTEP.
Example
OS10# show evpn router-mac
Local Router MAC : 14:18:77:25:4e:4d
Remote-VTEP Router's-MAC
4.4.4.4 14:18:77:25:6f:4d
5.5.5.5 00:00:01:00:a3:b4
Supported
releases
10.5.1.0 or later
show evpn vrf
Displays the VRF instances used to forward EVPN routes in VXLAN overlay networks.
Syntax
show evpn vrf [vrf-name]
Parameters vrf-name — (Optional) Enter the name of a non-default tenant VRF instance.
Default Not configured
Command mode EXEC
Usage
information
Use this command to verify the tenant VRF instances used in EVPN instances to exchange BGP EVPN
routes in VXLANs.
Example
show evpn vrf
VXLAN-VNI EVI Virtual-Network-Instance VRF-Name
102 102 102 blue
103 103 103 default
104 104 104 blue
106 106 106 default
105 105 105 blue
101 101 101 default
Supported
releases
10.4.3.0 or later
show evpn vrf l3-vni
Displays the configuration of the tenant VRF instances used for symmetric IRB.
Syntax
show evpn vrf l3-vni [tenant-vrf-name]
Parameters tenant- vrf-name — (Optional) Enter the name of a non-default tenant VRF instance.
Default Not configured
Command mode EXEC
Usage
information
Use the show evpn vrf l3-vni command to display the configuration settings of each tenant VRF
with its unique VXLAN VNI. Use the show evpn vrf command to display the tenant VRF instances
used to exchange BGP EVPN routes in VXLANs.
VXLAN 73