Setup Guide
16  Dell EMC SmartFabric OS10 Switch Configuration Guide for VxRail 4.7 
5.2  VxRail network configuration table 
Information provided in the VxRail network configuration table is used during VxRail deployment. The values 
used for this deployment example are shown in the right column. The VLANs and IP addresses used are 
based on the information from Table 2. 
Note: For additional information on the VxRail network configuration table, see the Dell EMC VxRail Network 
Planning Guide. 
  VxRail network configuration table 
Row
Category
Description
Values used  
1
VxRail
Management 
VLAN ID 
The recommended is untagged traffic on the Native VLAN. If 
you want the host to send only tagged frames, manually 
configure the VLAN on each ESXi™ host using DCUI, and 
set tagging for your management VLAN on your switch 
before you deploy VxRail.
0* 
2
VxRail initial IP
If you cannot reach the default (192.168.10.200/24), set an 
alternate IP address
192.168.10.200 
3
System
Global settings
Time zone
4
NTP server(s)
172.16.11.50 
5
DNS server(s)
172.16.11.50 
6
Proxy settings
IP address and port
7
Username and password
8
Management
ESXi 
hostnames and 
IP addresses 
ESXi hostname prefix
vxhost 
9
Separator
none 
10
Iterator
Num 0x 
11
Offset
1 
12
Suffix
none 
13
Domain
dell.local 
14
ESXi starting address for IP pool
172.16.11.1 
15
ESXi ending address for IP pool
172.16.11.40 
16
vCenter Server 
Leave blank if 
Customer 
Supplied VC 
vCenter Server hostname
vxvcenter 
17
vCenter Server IP address
172.16.11.100 
18 
Platform Services Controller hostname 
vxpsc 
19 
Platform Services Controller IP address 
172.16.11.101 
20 
Customer 
Supplied 
vCenter Server 
Leave blank if 
VxRail VC 
Customer Supplied Platform Services 
Controller (PSC) Hostname (FQDN) Leave 
blank if PSC is VxRail PSC 
21
Customer Supplied vCenter Server hostname (FQDN)
22
Customer Supplied vCenter Server SSO domain
23
admin username/password or the newly created VxRail non-
admin username and password
24
New VxRail management username and password
25
Customer Supplied data center name
26
New cluster name
27
VxRail Manager
VxRail hostname
vxman 
28
VxRail IP address
172.16.11.102 
29
Networking
Subnet mask
255.255.255.0 
30
Gateway
172.16.11.254 
31 
Passwords 
ESXi “root” passwords. Can be different for each host starting 
with Release 4.0.100. 
root_password 
32 
VxRail Manager and VxRail vCenter Server 
“administrator@vsphere.local” 
administrator_password 
33 
vMotion 
Starting address for IP pool 
172.16.12.1 










