Manualshelf

Setup Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S5248F-ON
31323334353637383940
32 Dell EMC SmartFabric OS10 Switch Configuration Guide for VxRail 4.7
General settings – single switch
S5248F-ON
configure terminal
hostname S5248F-ON
interface mgmt1/1/1
no ip address
ip address 100.67.172.38/24
no shutdown
management route 0.0.0.0/0 100.67.172.254
ipv6 mld snooping enable
ntp server 100.67.10.20
7.3.2 Configure VLANs
In this section, VLANs are configured per Table 2.
Create the External Management VLAN and assign an IP address. Create the vMotion, vSAN, VM Network,
and Internal Management VLANs. Enable IPv6 MLD snooping querier on the Internal Management VLAN for
node discovery.
Configure VLANs – single switch
S5248F-ON
interface vlan1611
description External_Mgmt
ip address 172.16.11.254/24
no shutdown
interface vlan1612
description vMotion
no shutdown
interface vlan1613
description vSAN
no shutdown
interface vlan1614
description VM_Network_A
no shutdown
interface vlan1615
description VM_Network_B
no shutdown
interface vlan3939
description Internal_Mgmt
no shutdown
ipv6 mld snooping querier