Setup Guide

44 Dell EMC SmartFabric OS10 Switch Configuration Guide for VxRail 4.7
A Validated components for S5248F-ON using VxRail 4.7
The following tables include hardware, software, and firmware that was used to configure and validate the
examples in this guide.
A.1 Dell EMC PowerSwitches
Switches and operating system versions
Qty
Item
OS version
2
Dell EMC PowerSwitch S5248F-ON leaf switches
10.5.0.0
1
Dell EMC PowerSwitch S3048-ON management switch
10.5.0.0
A.2 DAC Cables
DAC cables
Qty
Item
Dell PN
8
DAC-SFP28-25G-3.0M (Node connections)
0VXFJY
2
DAC-QSFP28-4SFP28-3M (VLTi connections)
07R9N9
Note: Dell EMC supported fiber optic cables and transceivers may also be used.
A.3 VxRail P570 nodes
A cluster of four VxRail P570 nodes was used to validate the examples in this guide. The nodes were each
configured using the information provided below.
VxRail P570 node components
Qty per node
Item
Firmware version
2
Intel Xeon Gold 6136 CPU @ 3.00GHz, 12 cores
12
16GB DDR4 DIMMs (192GB total)
2
240GB SAS SSD
8
1.2TB SAS HDD
1
Dell HBA330 Storage Controller
15.17.09.06
1
Boot Optimized Storage Solution (BOSS) Controller
2.5.13.3016
1
Broadcom 57414 rNDC – 2x25GbE SFP28 ports
21.40.22.21
-
BIOS
2.1.8
-
iDRAC with Lifecycle Controller
3.32.32.32