Users Guide

show vlt mismatch
Displays configuration mismatch between VLT peers.
Syntax
show vlt {domain-id | all} mismatch
Parameters domain-id—Enter a VLT domain ID, from 1 to 255.
Default None
Command Mode EXEC
Usage
Information
The show vlt mismatch command displays multicast configuration mismatches.
Example
OS10# show vlt all mismatch
Multicast routing mismatches:
Global status:
Parameter VRF Local Peer
---------------------------------------------------------------------
V4 Multicast default Enabled Disabled
Vlan status IPv4 IPv6
VlanId Local Peer Local Peer
--------------------------------------------------------
Vlan 11 Enabled Disabled Disabled Disabled
Vlan 12 Enabled Disabled Disabled Disabled
Vlan 13 Enabled Disabled Disabled Disabled
Supported
Releases
10.5.0 or later
1134 Multicast