Users Guide

You can configure the time interval in units of log
2
seconds between two successive announce messages.
OS10(config)# interface ethernet 1/1/1
OS10(conf-if-eth1/1/1)# ptp announce interval 1
Configure the PTP synchronization message interval
You can configure the time interval in units of log
2
seconds between two successive synchronization messages.
OS10(config)# interface ethernet 1/1/1
OS10(conf-if-eth1/1/1)# ptp sync-interval -1
Configure the delay request message interval
You can configure the time interval in units of log
2
seconds between two successive delay request messages.
OS10(config)# interface ethernet 1/1/1
OS10(conf-if-eth1/1/1)# ptp delay-req-min-interval 1
View PTP information
Use the show commands to view the PTP information, status, and settings.
View the PTP clock and port information
OS10# show ptp
PTP Clock : Boundary
Clock Identity : 68:4f:64:ff:ff:01:db:ec
Grandmaster Clock Identity : 00:16:00:ff:fe:00:02:00
Clock Mode : One-step
Clock Quality
Class : 248
Accuracy : <=100ns
Offset Log Scaled Variance : 0
Domain : 0
Priority1 : 128
Priority2 : 128
Profile : System-default
Steps Removed : 1
Mean Path Delay(ns) : 72
Offset From Master(ns) : -14
Number of Ports : 2
----------------------------------------------------------------------------
Interface State Port Identity
----------------------------------------------------------------------------
Ethernet1/1/22 Slave 68:4f:64:ff:ff:01:db:ec:1
Ethernet1/1/23 Master 68:4f:64:ff:ff:01:db:ec:2
----------------------------------------------------------------------------
Number of slave ports :1
Number of master ports :1
View the PTP clock and synchronization
OS10# show ptp clock
PTP Clock : Boundary
Clock Identity : 68:4f:64:ff:ff:01:db:ec
Grandmaster Clock Identity : 00:16:00:ff:fe:00:02:00
Clock Mode : One-step
Clock Quality
Class : 248
Accuracy : <=100ns
Offset Log Scaled Variance : 0
Domain : 0
Priority1 : 128
Priority2 : 128
Profile : System-default
Steps Removed : 1
Mean Path Delay(ns) : 68
System management
221