Users Guide

* 1 Present
2 Not Present
Interface Relay Configuration Mismatch
---------------------------------------------------------------------
VLAN: 10
VLT Unit ID Server-Override VSS Source-Interface
---------------------------------------------------------------------------------
* 1 enabled type-0(Red) -
2 disabled type-0(Blue) -
VNI: 20
VLT Unit ID Server-Override VSS Source-Interface
---------------------------------------------------------------------------------
* 1 - type-0(Red) Present
2 - type-1(ABC:1234) Not Present
Supported
Releases
10.5.2 or later
show vlt mismatch dhcpv6-relay
Displays the mismatch (if any), between the VLT peer for the DHCPv6 relay options configuration on the Global level, VLT port-
channel, and VLANs and VxLANs spanned across the VLT peers.
Syntax
show vlt vlt-domain mismatch dhcpv6-relay
Parameters None.
Defaults None
Command Mode EXEC
Usage
Information
This command shows the mismatch in the following parameters:
● dhcpv6 hostname.
● global interface-id and remote-id enable/disable status.
● prefix configuration of both interface-id and remote-id.
● remote-id customized description configuration.
● interface-id customized description configuration for vlt port-channel, spanned vlan and vxlans.
This command is restricted to netadmin, secadmin, and sysadmin role users.
Example
(Interface)
OS10(conf-if-po-20)# do show vlt 100 mismatch dhcpv6-relay
Global relay Configuration Mismatch
------------------------------------------------------------
DHCPv6 Hostname Mismatch:
VLT Unit ID Hostname
---------------------------------------------------------------
* 1 Present (DELL)
2 Not Present
Remote-id Mismatch:
VLT Unit ID Status prefix description
---------------------------------------------------------------------------------
* 1 - hostname default
2 - hostname-vrfname custom(force10)
Interface-id Mismatch:
VLT Unit ID Status prefix
---------------------------------------------------------
* 1 - hostname
2 - custom(DELL)
Interface Relay Configuration Mismatch
System management 329