Users Guide
FCF2(config-pmap-c-que)# class q3
FCF2(config-pmap-c-que)# bandwidth percent 70
9. Create a qos-map.
FCF2(config)# qos-map traffic-class tc-q-map1
FCF2(config-qos-map)# queue 3 qos-group 3
FCF2(config-qos-map)# queue 0 qos-group 0-2,4-7
10. Apply QoS configurations on the interface connected to FSB4.
FCF2(config)# interface ethernet 1/1/42
FCF2(conf-if-eth1/1/42)# no shutdown
FCF2(conf-if-eth1/1/42)# flowcontrol receive off
FCF2(conf-if-eth1/1/42)# priority-flow-control mode on
FCF2(conf-if-eth1/1/42)# ets mode on
FCF2(conf-if-eth1/1/42)# trust-map dot1p default
FCF2(conf-if-eth1/1/42)# qos-map traffic-class tc-q-map1
FCF2(conf-if-eth1/1/42)# service-policy input type network-qos nqpolicy
FCF2(conf-if-eth1/1/42)# service-policy output type queuing ets_policy
11. Apply vfabric on the interfaces connected to FSB4 and the target.
FCF2(config)# interface ethernet 1/1/42
FCF2(conf-if-eth1/1/42)# switchport access vlan 1
FCF2(conf-if-eth1/1/42)# vfabric 1
FCF2(config)# interface fibrechannel 1/1/4
FCF2(conf-if-fc1/1/4)# description target_connected_port
FCF2(conf-if-fc1/1/4)# no shutdown
FCF2(conf-if-fc1/1/4)# vfabric 2
Verify the configuration
Use the following show commands to verify the configuration:
FSB1
FSB1# show fcoe sessions
Enode MAC           Enode Interface FCF MAC           FCF interface      VLAN   FCoE 
MAC          FC-ID   PORT WWPN                
PORT WWNN
-----------------------------------------------------------------------------------------
---------------------------------------
f4:e9:d4:f9:fc:42   Eth 1/1/31      14:18:77:20:86:ce Po 10(Eth 1/1/36) 1001 
0e:fc:00:02:02:00  02:02:00 23:05:22:11:0d:64:67:11   22:04:22:13:0d:64:67:00
FSB1# show fcoe fcf
FCF MAC             FCF Interface       VLAN     FC-MAP         FKA_ADV_PERIOD    No. of 
Enodes      FCF Mode
-----------------------------------------------------------------------------------------
---------------------
14:18:77:20:86:ce   Po 10(Eth 1/1/36)    1001     0e:fc:00       8000              
1                   F
FSB1# show fcoe system
Mode                         : FSB
CVL Status                   : Enabled
FCOE VLAN List (Operational) : 1001,1002
FCFs                         : 1
Enodes                       : 1
Sessions                     : 1
FSB2
FSB2# show fcoe sessions
Enode MAC         Enode Interface FCF MAC          FCF interface      VLAN FCoE 
Fibre Channel
481










