Users Guide

42975359 64-byte pkts, 148695530 over 64-byte pkts, 36673423689 over 127-byte pkts
73342977260 over 255-byte pkts, 146685062757 over 511-byte pkts, 1.08008362381e+11
over 1023-byte pkts
226014744592 Multicasts, 1748572 Broadcasts, 138885003719 Unicasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Output statistics:
296360281011 packets, 226358952945618 octets
3524494 64-byte pkts, 82594679 over 64-byte pkts, 29792079210 over 127-byte pkts
59581169090 over 255-byte pkts, 119160073632 over 511-byte pkts, 8.7740839906e+10
over 1023-byte pkts
157108504268 Multicasts, 244622 Broadcasts, 139251532180 Unicasts
0 throttles, 1598455 discarded, 0 Collisions, wred drops
Rate Info(interval 30 seconds):
Input 3028 Mbits/sec, 483023 packets/sec, 1% of line rate
Output 1992 Mbits/sec, 317768 packets/sec, 1% of line rate
Time since last interface status change: 2 days 17:54:56
Verify LAG membership
OS10# show lacp interface ethernet 1/1/29
Interface ethernet1/1/1 is up
Channel group is 51 port channel is 51
PDUS sent: 27913
PDUS rcvd: 27882
Marker sent: 0
Marker rcvd: 0
Marker response sent: 0
Marker response rcvd: 0
Unknown packetse rcvd: 0
Illegal packetse rcvd: 0
Local Port: 1176 MAC Address=14:18:77:16:87:68
System Identifier=32768,14:18:77:16:87:68
Port Identifier=32768,1176
Operational key=51
LACP_Activity=active
LACP_Timeout=Long Timeout(30s)
Synchronization=IN_SYNC
Collecting=true
Distributing=true
Partner information refresh timeout=Long Timeout(90s)
Actor Admin State=ADEHJLMP
Actor Oper State=ADEGIKNP
Neighbor: 33
MAC Address=f0:ce:10:f0:ce:10
System Identifier=4096,f0:ce:10:f0:ce:10
Port Identifier=32768,33
Operational key=51
LACP_Activity=active
LACP_Timeout=Long Timeout(30s)
Synchronization=IN_SYNC
Collecting=true
Distributing=true
Partner Admin State=BDEGIKMP
Partner Oper State=ADEGIKNP
LACP fallback
LACP fallback allows downstream devices, like servers which are connected to ports of a switch configured as LACP, to
establish a link when the system is not able to finalize the LACP handshake.
For example, when servers boot in PXE mode, the server cannot exchange LACP PDUs and the switch does not enable the
ports.
Whenever a PXE server reboots, both the port channel and ports go down. While rebooting, the ports come up, but not the port
channel. LACP fallback enables the port-channel to be up and keeps sending packets to the PXE server.
When you enable LACP fallback, the switch starts a timer. If the timer expires before LACP completes, then the switch selects
one port of the port group and makes it operational.
Layer 2
551