Users Guide
5. Configure the interfaces as VLAN trunk ports and specify the allowed VLANs.
AG4(config)# interface range port-channel 51-58
AG4(conf-range-po-51-58)# no shutdown
AG4(conf-range-po-51-58)# switchport mode trunk
AG4(conf-range-po-51-58)# switchport trunk allowed vlan 3001
AG4(config)# interface range ethernet 1/1/31:1-1/1/31:2 
AG4(conf-range-eth1/1/31:1-1/1/31:2)# no shutdown
AG4(conf-range-eth1/1/31:1-1/1/31:2)# switchport mode trunk
AG4(conf-range-eth1/1/31:1-1/1/31:2)# switchport trunk allowed vlan 3001
6. View LLDP neighbors.
AG4# show lldp neighbors
Loc PortID          Rem Host Name    Rem Port Id           Rem Chassis Id
------------------------------------------------------------------------------
ethernet1/1/24:1    AG2              ethernet1/1/21:1      50:9a:4c:d4:d0:f0
ethernet1/1/24:2    AG2              ethernet1/1/21:2      50:9a:4c:d4:d0:f0
ethernet1/1/24:3    AG2              ethernet1/1/21:3      50:9a:4c:d4:d0:f0
ethernet1/1/24:4    AG2              ethernet1/1/21:4      50:9a:4c:d4:d0:f0
ethernet1/1/25:1    AG3              ethernet1/1/25:1      8c:04:ba:b0:96:40
ethernet1/1/25:2    AG3              ethernet1/1/25:2      8c:04:ba:b0:96:40
ethernet1/1/25:3    AG3              ethernet1/1/25:3      8c:04:ba:b0:96:40
ethernet1/1/25:4    AG3              ethernet1/1/25:4      8c:04:ba:b0:96:40
ethernet1/1/26:1    AG1              ethernet1/1/23:1      50:9a:4c:d5:b4:70
ethernet1/1/26:2    AG1              ethernet1/1/23:2      50:9a:4c:d5:b4:70
ethernet1/1/26:3    AG1              ethernet1/1/23:3      50:9a:4c:d5:b4:70
ethernet1/1/26:4    AG1              ethernet1/1/23:4      50:9a:4c:d5:b4:70
ethernet1/1/17:1    TR2              ethernet1/1/25:1      14:18:77:16:87:68
ethernet1/1/17:2    TR2              ethernet1/1/25:2      14:18:77:16:87:68
ethernet1/1/17:3    TR2              ethernet1/1/25:3      14:18:77:16:87:68
ethernet1/1/17:4    TR2              ethernet1/1/25:4      14:18:77:16:87:68
ethernet1/1/19:1    TR2              ethernet1/1/26:1      14:18:77:16:87:68
ethernet1/1/19:2    TR2              ethernet1/1/26:2      14:18:77:16:87:68
ethernet1/1/19:3    TR2              ethernet1/1/26:3      14:18:77:16:87:68
ethernet1/1/19:4    TR2              ethernet1/1/26:4      14:18:77:16:87:68
7. View VLAN members.
AG4# show vlan 3001
Codes: * - Default VLAN, M - Management VLAN, R - Remote Port Mirroring VLANs,
       @ - Attached to Virtual Network, P - Primary, C - Community, I - Isolated
Q: A - Access (Untagged), T - Tagged
    NUM    Status    Description                     Q Ports
    3001   Active                                    T Eth1/1/31:1-1/1/31:2 
                                                     T Po1,51-58,1000
8. View port channel members.
AG4# show interface port-channel summary | no-more
LAG   Mode      Status   Uptime         Ports
1     L2-HYBRID up       01:36:39       Eth 1/1/24:1 (Up)
                                        Eth 1/1/24:2 (Up)
                                        Eth 1/1/24:3 (Up)
                                        Eth 1/1/24:4 (Up)
                                        Eth 1/1/26:1 (Up)
                                        Eth 1/1/26:2 (Up)
                                        Eth 1/1/26:3 (Up)
                                        Eth 1/1/26:4 (Up)
51    L2-HYBRID up       01:36:35       Eth 1/1/17:1 (Up)
52    L2-HYBRID up       01:36:34       Eth 1/1/17:2 (Up)
53    L2-HYBRID up       01:36:33       Eth 1/1/17:3 (Up)
54    L2-HYBRID up       01:36:31       Eth 1/1/17:4 (Up)
55    L2-HYBRID up       01:36:32       Eth 1/1/19:1 (Up)
56    L2-HYBRID up       01:36:31       Eth 1/1/19:2 (Up)
57    L2-HYBRID up       01:36:33       Eth 1/1/19:3 (Up)
58    L2-HYBRID up       01:36:32       Eth 1/1/19:4 (Up)
IPv4 host is present under TR1. Its IPv4 address is 10.1.1.10, and MAC address is 00:41:30:01:00:00 with the gateway pointing to
the VLAN anycast IPv4 virtual address 10.1.1.5. This host is learned across all four VLT nodes as shown below:
658
Layer 2










