Users Guide

Parameters interface-name—Enter the interface information in node/slot/port[:subport] format.
Command Mode EXEC
Usage
Information
Use this command to verify information about the PVLAN-specific details of an interface. This command
displays the VLAN ID associated with the interface.
Examples
OS10# show vlan private-vlan interface ethernet 1/1/11
Primary Secondary Type Active Ports
------- --------- --------- ------ ---------
100 Primary Yes Eth1/1/11
101 Primary Yes Eth1/1/11
OS10# show vlan private-vlan interface ethernet 1/1/7
Primary Secondary Type Active Ports
------- --------- --------- ------ ---------
4002 Community Yes Eth1/1/7
OS10# show vlan private-vlan interface ethernet 1/1/5
Primary Secondary Type Active Ports
------- --------- --------- ------ --------
4001 Isolated Yes Eth1/1/5
OS10# show vlan private-vlan interface port-channel 101
Primary Secondary Type Active Ports
------- --------- --------- ------ -----------------------------
10 Isolated No Po101
20 Community No Po101
30 Community No Po101
100 Primary No Po101
Supported
Releases
10.5.2.0 or later
show vlan private-vlan mapping
Displays primary-to-secondary PVLAN mappings.
Syntax
show vlan private-vlan mapping
Parameters None
Command Mode EXEC
Usage
Information
Use this command to view the following information:
● A list of primary VLANs
● A list of secondary VLANs
● The primary-VLAN-to-secondary-VLAN mapping information
Example
OS10# show vlan private-vlan mapping
Private Vlan:
Primary : 100
Isolated : 10
Community : 20,30
Private Vlan:
Primary : 101
Isolated : 11
Community : 21,31
Supported
Releases
10.5.2.0 or later
680 Layer 2