Deployment Guide

23 Dell EMC Solutions for Microsoft Azure Stack HCI Networking Guide
6.3 Factory default configuration
The switch configuration commands in the sections that follow begin with the leaf switches at their factory
default settings. Dell EMC Networking switches running OS10EE can be reset to their default configuration as
follows:
OS10# delete startup-configuration
Proceed to delete startup-configuration [confirm yes/no(default)]:y
OS10# reload
System configuration has been modified. Save? [yes/no]:n
Proceed to reboot the system? [confirm yes/no]:y
The switch reboots to its factory default configuration.
Note: OS10EE at its default settings has Telnet disabled, SSH enabled, and the OOB management interface
configured to get its IP address via DHCP. The default username and password are both admin. Dell EMC
recommends changing the admin password to a complex password during the first login.