Owners Manual

Table 3. Firewall parameters (continued)
Parameter # Parameter data
Add IPv6 address range with timeout
rule
22 Data 1:16—IPv6 address range
● [1:16]—Port number from the ports
blocked or unblocked based on the
state.
● [17:32]—Port number till the ports
blocked or unblocked based on the
state.
● Date 33:38—Start time
● [33:34]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 35—month
● 36—date
● 37—hour
● 38—minute
● Date 39:44—stop time
● [39:40]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 41—month
● 42—date
●
43—hour
● 44—minute
Remove the IPv6 address with timeout
rule
23 Data 1:16—IPv6 address
● MS-byte first. The IPv4 address type
blocked or unblocked based on the
state.
● Date 17:22—Start time
● [17:18]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 19—month
● 20—date
● 21—hour
● 22—minute
● Date 23-28—stop time
● [23:24]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 25—month
● 26—date
● 27—hour
● 28—minute
Remove the Ipv6 address range with
timeout rule
24 Data 1:16—IPv6 address range
● [1:16]—Port number from the ports
blocked or unblocked based on the
state.
● [17:32]—Port number till the ports
blocked or unblocked based on the
state.
● Date 33:38—Start time
● [33:34]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
24 Configuration methods