Administrator Guide

Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Introduced on the S6000, Z9500, S6000-ON.
Related
Commands
show running-config monitor session — displays information about monitor configurations.
monitor session
Create a session for monitoring traffic with port monitoring.
Syntax
monitor session session-ID [type { rpm | erpm [set ip dscp dscp_value | set ip
ttl ttl_value]}] [drop]
To delete a session, use the no monitor session session-ID command.
To delete all monitor sessions, use the no monitor session all command.
Parameters
session-ID Enter a session identification number. The range is from 0 to 65535.
type Specifies one of the following type:
• rpm
•
erpm
rpm Creates a remote port monitoring (rpm) session.
erpm Creates an encapsulated remote port monitoring (erpm) session.
set ip dscp Configures the Differentiated Services Code Point (DSCP) value of the packets in the
Encapsulated Remote Switched Port Analyzer (ERSPAN) traffic. To revert to the default
value, use the no form of this command.
dscp_value DSCP value of the packets in the ERSPAN traffic. The range is from 0 to 63. The default
value is 0.
set ip ttl Configures the IP time-to-live (TTL) value of the Encapsulated Remote Switched Port
Analyzer (ERSPAN) traffic. To revert to the default configuration, use the no form of this
command.
ttl_value IP TTL value of the ERSPAN traffic. The range is from 1 to 255. The default value is 255.
drop Monitors only the dropped packets in the Ingress.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
Port Monitoring 1153