Administrator Guide

Example
DellEMC# show interfaces vlan 10
Vlan 10 is up, line protocol is down
Address is 90:b1:1c:f4:99:ce, Current address is 90:b1:1c:f4:99:ce
Interface index is 1107787786
Internet address is not set
Mode of IPv4 Address Assignment: NONE
DHCP Client-ID: 90b11cf499ce
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed auto
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 2d17h26m
Queueing strategy: fifo
Time since last interface status change: 2d17h26m
Input Statistics:
0 packets, 0 bytes
Output Statistics:
0 packets, 0 bytes, 0 underruns
show system stack-unit quad-port-profile
Displays the list of configured and activated dynamic fan-out capable ports.
Syntax
show system [stack-unit-number] quad-port-profile
Parameters
stack-unit number Enter the port number. The range is from 1–6.
Command Modes EXEC Privilege
Command History
Version Description
9.10(0.1) Introduced on the S6010-ON.
9.7(0.0) Introduced on the S6000 and S6000–ON.
Example
Dell#show system stack-unit 1 quad-port-profile
Configured fan out profile ports in stack-unit 1
Configured Activated
2 2
4 4
6 6
8 8
9 9
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
24 24
25 25
27 27
29 29
31 31
Related
Commands
stack-unit portmode — splits a single 40G port into four-10G ports
676 Interfaces