Administrator Guide

Version Description
7.6.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
advertise interface-port-desc
Advertise port descriptor.
Syntax
advertise interface-port-desc {description | port-id}
To remove the advertised port descriptor, use the no advertise interface—port—desc
{description | port-id} command.
Parameters
description Enter the keyword description then the interface description.
port-id Enter the keyword port-id then the port-id. The range is from 0 to 7.
Defaults None
Command Modes
CONFIGURATION (conf-lldp)
INTERFACE (conf-if-interface-lldp)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(2.0P1) Introduced the description and port-id options.
Usage Information
If you do not specify the option, by default the port-id takes higher precedence and sends the port-id in the LLDP
packets.
clear lldp counters
Clear LLDP transmitting and receiving counters for all physical interfaces or a specific physical interface.
Syntax
clear lldp counters [interface interface]
Parameters
interface interface (OPTIONAL) Enter the following keywords and the interface information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
Link Layer Discovery Protocol (LLDP) 885