Service Manual

Version Description
8.1.1.0 Introduced on the E-Series ExaScale.
Usage Information This command is applicable to last hop routers on the shared tree towards the rendezvous point (RP).
show ip pim bsr-router
View information on the Bootstrap router.
S6000–ON
Syntax
show ip pim [vrf vrf-name] bsr-router
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the S-Series.
Example
Dell#show ip pim bsr-router
PIMv2 Bootstrap information
This system is the Bootstrap Router (v2)
BSR address: 7.7.7.7 (?)
BSR Priority: 0, Hash mask length: 30
Next bootstrap message in 00:00:08
This system is a candidate BSR
Candidate BSR address: 7.7.7.7, priority: 0, hash mask length: 30
show ip pim interface
View information on the interfaces with IP PIM enabled.
S6000–ON
Syntax
show ip pim [vrf vrf-name] interface
Command Modes
• EXEC
PIM-Sparse Mode (PIM-SM)
1033