Service Manual

Version Description
8.3.1.0 Introduced.
service-class bandwidth-percentage
Specify a minimum bandwidth for queues.
S6000–ON
Syntax
service-class bandwidth-percentage queue0 number queue1 number queue2
number queue3 number
Parameters
number Enter the bandwidth-weight, as a percentage.
Defaults none
Command Modes CONFIGURATION
Command History
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
Usage Information Guarantee a minimum bandwidth to dierent queues globally using the service-class bandwidth-
percentage command from CONFIGURATION mode. The command is applied in the same way as the
bandwidth-percentage command in an output QoS policy. The bandwidth-percentage command
in QOS-POLICY-OUT mode supersedes the service-class bandwidth-percentage command.
service-class dot1p-mapping
Congure a service-class criterion based on a dot1p value.
S6000–ON
Syntax
service-class dot1p-mapping {dot1p0 queue | dot1p1 queue | dot1p2 queue |
dot1p3 queue | dot1p4 queue| dot1p5 queue | dot1p6 queue | dot1p7 queue}
Parameters
queue Enter a value from 0 to 7.
Defaults For each dot1p Priority, the default CoS queue value is:
• Dot1p Priority : 0 1 2 3 4 5 6 7
• Queue : 2 0 1 3 4 5 6 7
Command Modes CONFIGURATION
1072
Quality of Service (QoS)