Service Manual

S6000–ON
Syntax
[No] Service-class buffer shared-threshold-weight {[queue0 number] ||
[queue1 number] || [queue2 number] || [queue3 number] || [queue4 number] ||
[queue5 number] || [queue6 number] || [queue7 number]}
Parameters
buer Dene the shared buer settings
shared-threshold-
weight
Specify the weight of a queue for the shared buer space
queue 0 to queue 7 Specify the queue number to which the WRED parameters apply
number Enter a weight for the queue on the shared buer as a number in the range of 1 to
11.
Default The default threshold weight on the shared buer for each queue is 9. Therefore, each queue can consume
up to 66.67 percent of available shared buer by default.
Command Modes INTERFACE mode
Command History
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.3(0.0) Introduced on the S6000 platform
Usage Information You can congure all the data queues. For S6000, you can congure queues 0-7.
The following table describes the mapping between the threshold weight of the shared buer on the queue
and the percentage of available shared buer that is used by the queue for each of the corresponding
threshold weights of the shared buer:
shared-threshold-weight on the queue % of available shared buer that can be
consumed by the queue.
0 No dynamic sharing; shared buer = 0.
1 0.77%
2 1.54%
3 3.03%
4 5.88%
5 11.11%
6 20%
7 33.33%
8 50%
9 66.67%
10 80%
Quality of Service (QoS)
1103