Service Manual

max-drop-
probability number
Enter the keyword max-drop-probability followed by the maximum number of
packets for the WRED prole. The range is from 0 to 100 KB
Defaults none
Command Modes CONFIGURATION (cong-wred)
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Usage Information To congure the minimum and maximum threshold values for user-dened proles, use this command.
Additionally, to modify the minimum and maximum threshold values for the pre-dened WRED proles, use
this command. If you delete the threshold values of the pre-dened WRED proles, the proles revert to
their original default values.
Pre-Dened WRED Prole
Name
Minimum Threshold Maximum Threshold Maximum Drop Rate
wred_drop 0 0 100
wred_teng_y 594 5941 100
wred_teng_g 594 5941 50
wred_fortyg_y 594 5941 50
wred_fortyg_g 594 5941 25
Related Commands wred-prole — creates a WRED prole.
trust
Specify dynamic classication (DSCP) or dot1p to trust.
S6000–ON
Syntax
trust {diffserv [fallback]| dot1p [fallback]}
Parameters
diserv Enter the keyword diffserv to specify trust of DSCP markings.
dot1p Enter the keyword dot1p to specify trust dot1p conguration.
fallback Enter the keyword fallback to classify packets according to their DSCP or dot1p
value as a secondary option in case no match occurs against the congured class
maps.
1106
Quality of Service (QoS)