Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6000 ON

1281

included (OPTIONAL) Enter the keyword included to include the MIB family in the view.

excluded (OPTIONAL) Enter the keyword excluded to exclude the MIB family in the view.

Defaults none

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

E-Series legacy

command

Usage Information The oid-tree variable is a full sub-tree starting from 1.3.6 and cannot specify the name of a sub-tree or a

MIB. The following Example congures a view named rview that allows access to all objects under 1.3.6.1.

Example

Dell# conf

Dell#(conf) snmp-server view rview 1.3.6.1 included

Related Commands show running-cong snmp — displays the SNMP running conguration.

snmp-server vrf

Congures an SNMP agent to bind to a specic VRF.

Syntax

snmp-server vrf vrf-name

To undo the SNMP agent conguration, use the no snmp-server vrf vrf-name command.

Parameters

vrf vrf-name Enter the keyword vrf and then the name of the VRF to associate an SNMP

agent with that VRF.

Defaults Not Enabled.