Service Manual
Command History
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information All the default catch-all entries in the longest prex match (LPM) table collect and transmit all unresolved
IPv6 packets to the CPU, even if they are destined for unknown destinations.
description
Enables you to specify a descriptive name for a customer VRF.
Syntax
description string
To delete the descriptive name for a customer VRF, use the no description string command.
Parameters
string Enter a descriptive name for the VRF.
Defaults None.
Command Modes VRF MODE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.4.(0.0) Introduced on the S-Series.
Usage Information
Use this command to specify a descriptive name for a VRF.
ip vrf forwarding
Enables you to attach an interface to a VRF.
Syntax
ip vrf forwarding {vrf-name | management}
To delete an interface associated with a congured VRF, use the no ip vrf forwarding {vrf-name
| management} command.
Parameters
vrf-name Enter name of the VRF that you want to associate the interface to.
1372
Virtual Routing and Forwarding (VRF)