Service Manual

connected Enter the keyword connected to leak or share connected routes corresponding to
the VRF.
static Enter the keyword static to leak or share static routes corresponding to the VRF.
Defaults N/A
Command Modes ROUTE MAP MODE
Command History
Version Description
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.
Usage Information
You can specify the matching criteria only after dening a route-map. Before using this command, you must
enter the route map mode using the route-map route-map-name command. The match criteria that you
specify is associated with the route-map that you dene.
The export-target and import-target support only the match protocol and match prex-list options. Other
options that are congured in the route-maps are ignored.
Related Commands ipv6 route-import – imports IPv6 routes from another VRF.
redistribute
Redistributes leaked or exported routes corresponding to specic protocols.
Syntax
redistribute {imported-bgp | import-ospf | import-isis}
Parameters
imported-bgp Enter the keyword imported-bgp to redistribute leaked routes that are learnt using
the BGP protocol.
imported-ospf Enter the keyword imported-ospf to redistribute leaked routes that are learnt using
the OSPF protocol.
imported-isis Enter the keyword imported-isis to redistribute leaked routes that are learnt using
the ISIS protocol.
route-map Enter the name of the route-map to specify the ltering criteria for imported
routes.
Defaults N/A
Command Modes
CONFIGURATION
Command History
Version Description
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.
Related Commands ip route-import – imports routes from another VRF.
1378
Virtual Routing and Forwarding (VRF)