Service Manual
fail-mode
Congures failure-mode on the platform.
Syntax
fail-mode secure
To disable the fail-mode secure, use the no fail-mode securecommand.
Parameters
secure Enter the keyword secure to delete all its database and hardware ows/
resources, when the VTEP loses connectivity with the controller.
Defaults non secure
Command Modes VXLAN INSTANCE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Related Commands vxlan-instance— Enable VXLAN Instance conguration on the platform.
vxlan-instance
Enable VXLAN Instance conguration on the platform.
Syntax
vxlan-instance instance ID
To enable the vxlan-instance command, use the [no] shut command.
To delete vxlan-instance from the system, use no vxlan-instance 1 command.
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Usage Information You must congure VXLAN globally before using VXLAN-instance.
Virtual Extensible LAN (VXLAN)
1407