Service Manual

Item Description
Tracking states.. This line is displayed if the track command is congured on an interface. Below
this line, the following information on the tracked interface is displayed:
• Dn or Up states whether the interface is down or up.
• the interface type slot/port information.
Example
Dell>show vrrp
------------------
TenGigabitEthernet 1/1/3, VRID: 1, Net: 10.1.1.253
State: Master, Priority: 105, Master: 10.1.1.253 (local)
Hold Down: 0 sec, Preempt: TRUE, AdvInt: 1 sec
Adv rcvd: 0, Adv sent: 1862, Gratuitous ARP sent: 0
Virtual MAC address:
00:00:5e:00:01:01
Virtual IP address:
10.1.1.252
Authentication: (none)
Tracking states for 1 interfaces:
Up TenGigabitEthernet 1/1/4 priority-cost 10
------------------
TenGigabitEthernet 1/4/1, VRID: 2, Net: 10.1.2.253
State: Master, Priority: 110, Master: 10.1.2.253 (local)
Hold Down: 10 sec, Preempt: TRUE, AdvInt: 1 sec
Adv rcvd: 0, Adv sent: 1862, Gratuitous ARP sent: 0
Virtual MAC address:
00:00:5e:00:01:02
Virtual IP address:
10.1.2.252
Authentication: (none)
Tracking states for 2 interfaces:
Up TenGigabitEthernet 2/1/1 priority-cost 10
Up TenGigabitEthernet 1/1/4 priority-cost 10
Dell>
track
Monitor an interface and lower the priority value of the VRRP group on that interface if it is disabled.
Syntax
track interface [priority-cost cost]
To disable monitoring, use the no track interface command.
Parameters
interface (OPTIONAL) Enter the following keywords and slot/port[/subport] or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port/subport information.
• For a Loopback interface, enter the keyword loopback then a number from 0
to 16383.
•
For Port Channel interface types, enter the keywords port-channel then a
number.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
• For a VLAN interface, enter the keyword vlan followed by the VLAN ID. The
VLAN ID range is from 1 to 4094.
Virtual Router Redundancy Protocol (VRRP)
1427