Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6000 ON

1427

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.2.1.1 Introduced on the E-Series.

Usage Information The VRRP group only becomes active and sends VRRP packets when a virtual IP address is congured.

When you delete the virtual address, the VRRP group stops sending VRRP packets.

Related Command virtual-address — assigns up to 12 virtual IP addresses per VRRP group.

version

Set VRRP protocol version for IPv4 group.

Syntax

version {2 | 3 | both}

To return to the default setting, use the no version command.

Parameters

2 Enter the 2 parameter to specify VRRP version 2 as dened by RFC 3768, Virtual

Router Redundancy Protocol.

3 Enter the 2 parameter to specify VRRP version 3 as dened in RFC 5798, Virtual

Router Redundancy.

both Enter the both keyword for in-service migration from VRRP version 2 to VRRP

version 3.

Defaults 2

Command Modes VRRP