Service Manual

Version Description
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Related Commands set as-path — adds information to the BGP AS_PATH attribute.
match community
To match routes that have a certain COMMUNITY attribute in their BGP path, congure a lter.
Syntax
match community community-list-name [exact]
To delete a community match lter, use the no match community command.
Parameters
community-list-
name
Enter the name of a congured community list.
exact (OPTIONAL) Enter the keywords exact to process only those routes with this
community list name.
Defaults Not congured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Related Commands
set community — species a COMMUNITY attribute.
match interface
To match routes whose next hop is on the interface specied, congure a lter.
Syntax
match interface interface
To remove a match, use the no match interface interface command.
218
Access Control Lists (ACL)