Service Manual

boot show net cong retries
Show the number of retries for network boot conguration failure.
Syntax boot show net cong retries
Command Modes BOOT_USER
Command History
Version 9.0.2.0 Introduced on the S6000.
Example
BOOT_USER #boot show net config retries
Number of Network Boot Config Retries is : 0
BOOT_USER #
boot write net cong retries
Set the number of retries for network boot conguration failure.
Syntax boot write net cong retries <int>
Command Modes BOOT_USER
Command History
Version 9.0.2.0 Introduced on the S6000.
Example
BOOT_USER # boot write net config retries 2
Updated number of Network Boot Config retries to 2
BOOT_USER #
boot zero
Erase the congured primary, secondary, or default boot image parameters. If you erase all three parameters, the S6000 switch
boots from its internal Flash.
Syntax
boot zero primary | secondary | default}
Parameters
primary
Enter the keyword primary to congure the boot parameters used in the rst
attempt to boot the system.
secondary
Enter the keyword secondary to congure boot parameters used if the primary
operating system boot selection is not available.
Boot Command Line Interface
283