Service Manual

default
Enter the keyword default to congure boot parameters used if the secondary
operating system boot parameter selection is not available. You can congure this
option to any of the available type, for example ash/usb/ftp/tftp.
Defaults None
Command Modes BOOT_USER
Command History
Version 9.0.2.0 Introduced on the S6000.
Usage Information
This command reverses changes made with the boot change command.
BOOT_USER # boot zero primary
BOOT_USER # boot zero secondary
BOOT_USER # boot zero default
BOOT_USER # show bootvar
PRIMARY OPERATING SYSTEM BOOT PARAMETERS:
========================================
No Operating System boot parameters specied!
SECONDARY OPERATING SYSTEM BOOT PARAMETERS:
==========================================
No Operating System boot parameters specied!
DEFAULT OPERATING SYSTEM BOOT PARAMETERS:
========================================
No Operating System boot parameters specied!
BOOT_USER #
Related Commands
boot_change— Change the primary, secondary, or default boot image conguration.
default-gateway
Assign an IP address as the default gateway for the system.
Syntax
[no] default-gateway ip-address
284
Boot Command Line Interface