Service Manual
Parameters
ip-address
Enter the IP address of the gateway router in dotted decimal format (A.B.C.D).
Command Modes BOOT_USER
Command History
Version 9.0.2.0 Introduced on the S6000.
Usage Information
Use the show default-gateway command to view the current default gateway.
Related Commands show_default-gateway— Change the primary, secondary, or default boot image conguration.
etheraddr <macaddr>
Assign the management port MAC address.
Syntax etheraddr <macaddr>
Parameters
mac-address
Enter a MAC address in standard format.
Command Modes BOOT_ADMIN
Command History
Version 9.0.2.0 Introduced on the S6000.
Usage Information
Use this command to assign a MAC address if FTOS cannot nd a default MAC address.
Example
BOOT_ADMIN # etheraddr aa:aa:aa:aa:aa:aa
<Macaddr> XX:xx:xx:xx:xx:xx
No defaults for this
ignore enable-password
Reload the system software without the enable password congured.
Syntax
ignore enable-password
Command Modes BOOT_USER
Command History
Version 9.0.2.0 Introduced on the S6000.
Boot Command Line Interface
285