Service Manual

Parameters
serial console [unit]
[baud]
Enter the keyword to set the serial port baud rate. The supported values for serial
console:
• Unit - 0
• Baud rate -9600,115200
No defaults.
Command Modes BOOT_USER
Command History
Version 9.0.2.0 Introduced on the S6000.
Example Serial
BOOT_USER # serial console 0 9600
BOOT_USER # BOOT_USER #
show bootvar
Display boot conguration information.
Syntax
show bootvar
Command Modes BOOT_USER
Command History
Version 9.0.2.0 Introduced on the S6000.
Example
BOOT_USER # show bootvar
PRIMARY OPERATING SYSTEM BOOT PARAMETERS:
========================================
No Operating System boot parameters specied!
SECONDARY OPERATING SYSTEM BOOT PARAMETERS:
========================================
boot device : ash
le name : systema (FTOS system://A Partition)
DEFAULT OPERATING SYSTEM BOOT PARAMETERS:
========================================
boot device : tftp
288
Boot Command Line Interface