Service Manual

show interface ets
Displays the ETS conguration applied to egress trac on an interface, including priority groups with priorities and bandwidth
allocation.
Syntax
show interface port-type slot/port[/subport] ets {summary | detail}
Parameters
port-type slot/
port[/subport] ets
Enter the port-type slot and port ETS information. Enter the subport number if a
40G port is fanned-out into 10G ports.
{summary | detail} Enter the keyword summary for a summary list of results or enter the keyword
detail for a full list of results.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.2(0.2) Down status messages added.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
Example (Summary)
Dell#show interface te 1/3/1 ets de
Interface TenGigabitEthernet 1/3/1
Max Supported TC Groups is 4
Number of Traffic Classes is 8
Admin mode is on
Admin Parameters :
------------------
Admin is enabled
TC-grp Priority# Bandwidth TSA
------------------------------------------------
0 - -
1 0,1,2 100% ETS
2 3 0 % SP
3 4,5,6,7 0 % SP
4 - -
5 - -
6 - -
7 - -
Remote Parameters :
-------------------
Remote is disabled
Local Parameters :
------------------
Local is enabled
420
Data Center Bridging (DCB)