Service Manual

Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information This command is available at the global level only.
show interface dcbx detail
Displays the DCBX conguration on an interface.
Syntax
show interface port-type slot/port[/subport] dcbx detail
Parameters
port-type Enter the port type.
slot/port[/subport] Enter the slot/port number. Enter the subport number if a 40G port is fanned-out
into 10G ports.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.2.(0.0) Down status messages added.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
To clear DCBX frame counters, use the clear dcbx counters interface stack-unit/port
command.
The following describes the show interface dcbx detail command shown in the following example.
Field Description
Interface Interface type with chassis slot and port number.
428
Data Center Bridging (DCB)