Service Manual

show hardware drops
Displays internal drops on the specied interface or for a range of interface.
Syntax
show hardware drops interface interface
Parameters
interface
Enter any of the following keywords and slot/port[/subport] or slot/port-range or
number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port/subport information.
•
For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
drops
Enter the keyword drops to display internal drops.
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Removed the keywords stack-unit. Introduced on the Z9500.
9.7(0.0) Introduced on the S6000-ON.
9.2(0.2) Modied the drops keyword range, unit keyword range and added the buffer
and cpu management statistics options.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.5 Added i2c statistics and sata-interfaces statistics.
8.3.11.4 Added user port information.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
Example displaying
internal drops for the
specic interface
Dell#show hardware drops interface tengigabitethernet 2/1/1
Drops in Interface Te 2/1/1:
--- Ingress Drops ---
Ingress Drops : 0
IBP CBP Full Drops : 0
PortSTPnotFwd Drops : 0
IPv4 L3 Discards : 0
Policy Discards : 0
Debugging and Diagnostics
465