Service Manual

ip domain-list
Adds a domain name to the DNS list. This domain name is appended to incomplete host names in DNS requests corresponding to a
specic VRF.
Syntax
ip domain-list [vrf vrf-name] name
To remove a domain name from DNS list, use the no ip domain-list [vrf vrf-name] name
command.
Parameters
vrf vrf-name (Optional) Enter the key word vrf and then the name of the VRF to add a domain
name to the DNS list corresponding to that VRF.
name Enter the name of the domain to be appended to the DNS list corresponding to the
VRF.
Defaults None
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage Information Use this command to add domain names to the DNS lists corresponding to a specic VRF. You can add up
to a maximum of six domain names to the DNS list corresponding to a VRF. This domain is used to complete
the unqualied host names.
Example
Dell(conf)#ip domain-list vrf jay dell.com
Dell(conf)#ip domain-list vrf jay force10.com
ip host
Congures a mapping between the host name server and the IP address for a specic VRF. This mapping information is used by the
name-to-IP address table to resolve host names.
Syntax
ip host [vrf vrf-name] name ip-address
To undo the host name server to IP address mapping for VRFs, use the no ip host [vrf vrf-name]
name ip-address command.
Parameters
vrf vrf-name (Optional) Enter the key word vrf and then the name of the VRF to congure the
name server to IP address mapping for that VRF.
name Enter the name od the host to be associated with an IP address.
502
Dynamic Host Conguration Protocol (DHCP)