Service Manual
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.2.1.0 Added support for 4093 VLANs on E-Series ExaScale. Prior releases supported
2094.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information When creating an interface range, interfaces appear in the order they are entered; they are not sorted. The
command veries that interfaces are present (physical) or congured (logical).
Important Points to Remember:
• Bulk conguration is created if at least one interface is valid.
• Non-existing interfaces are excluded from the bulk conguration with a warning message.
• The interface range prompt includes interface types with slot/port[/subport] information for valid
interfaces. The prompt allows for a maximum of 32 characters. If the bulk conguration exceeds 32
characters, it is represented by an ellipsis ( ... ).
• When the interface range prompt has multiple port ranges, the smaller port range is excluded
from the prompt.
• If overlapping port ranges are specied, the port range is extended to the smallest start port and the
biggest end port.
Example (Bulk)
Dell(conf)#interface range tengigbitethernet 2/10/1 - 2/11/2, fortyGigbE
3/3, tengigbitethernet 3/10/1
% Warning: Non-existing ports (not configured) are ignored by
interface-range
Example (Multiple
Ports)
Dell(conf)#interface range tengigabitethernet 2/10/1 - 2/20/3,
tengigabitethernet 2/11/2 - 2/14/4
Dell(conf-if-range-te-2/10/1-2/20/3)#
Example
(Overlapping Ports)
Dell(conf)#interface range tengigabitethernet 2/1/1 - 2/10/1,
tengigabitethernet 2/1/1 - 2/20/3
Dell(conf-if-range-te-2/1/1-2/20/3)#
Interfaces
587