Service Manual
Parameters
all Enter the keyword all to display the boot image information for all stack units.
stack-unit Enter the keyword stack-unit followed by a number to display boot image
information for a stack-unit.
The range is from 1 to 6.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the C-Series and E-Series.
Example
Dell#show boot system stack-unit 1
Current system image information in the system:
=============================================
Type Boot Type A B
----------------------------------------------------------------
Stack-unit 1 FLASH BOOT 9-0(2-1) 9-0(2-0)[boot]
Dell#
show bootvar
Display the variable settings for the boot parameters.
Syntax
show bootvar
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
File Management
65