Service Manual

clear ipv6 neighbors
Delete all entries in the IPv6 neighbor discovery cache or neighbors of a specic interface. Static entries are not removed using this
command.
Syntax
clear ipv6 neighbors [ipv6-address | interface]
Parameters
ipv6-address Enter the IPv6 address of the neighbor in the x:x:x:x::x format to remove a specic
IPv6 neighbor.
NOTE: The :: notation species successive hexadecimal elds of zero.
interface interface To remove all neighbor entries learned on a specic interface, enter the keyword
interface then the interface type and slot/port or number information of the
interface:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port/subport information.
•
For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
• For a port channel interface, enter the keywords port-channel then a
number.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
debug ipv6 nd ra-guard
Enable debugging for IPv6 RA guard snooping information.
Syntax
debug ipv6 nd ra-guard [interface_type slot/port | count value]
Parameters
interface_type slot/
port
Enter the one of the following interfaces and slot/port information:
• For a port channel interface, enter the keywords port-channel then a
number.
Neighbor Discovery Protocol (NDP)
879