Service Manual
trusted-port
Allow bypassing the congured RA guard validation and forwards the RA packets received on the interface, which has the trusted
port policy attached.
Syntax
trusted-port
To reset the policy applied to the trusted port, use the no trusted-port command.
Defaults none
Command Modes POLICY LIST CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.
Usage Information Use this command to disable all the RA guard policies.
Related Commands
• ipv6 nd ra-guard enable — Allows you to congure the RA guard related commands.
• ipv6 nd raguard policy policy-name — Denes the router advertisement (RA) guard policy name and
enter the RA guard policy conguration mode.
892
Neighbor Discovery Protocol (NDP)