Users Guide

Dell(config-ext-nacl)# permit ip any 232.1.1.0/24

Dell(config-ext-nacl)# permit ip 100.1.1.0/16 any

Dell(config-if-te-1/1)# ip pim join-filter iptv-channels

Related Commands

• ip access-list extended — configure an access list based on IP addresses or protocols.

ip pim neighbor-filter

To prevent a router from participating in protocol independent multicast (PIM), configure this feature.

Syntax

ip pim [vrf vrf-name] neighbor-filter {access-list}

To remove the restriction, use the no ip pim [vrf vrf-name] neighbor-filter {access-list}

command.

Parameters

vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to prevent that

VRF from participating in PIM.

NOTE: Applies to specific VRF if input is provided, else applies to default

VRF.

access-list Enter the name of a standard access list. Maximum 16 characters.

Defaults none

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Added support for VRF. Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series.

7.8.1.0 Introduced on the C-Series and S-Series.

PIM-Sparse Mode (PIM-SM) 1161