Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6000 ON

1481

logging version

Displays syslog messages in a RFC 3164 or RFC 5424 format.

Syntax

logging version {0|1}

Defaults

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100–ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.5(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL.

Usage Information

To display syslog messages in a RFC 3164 or RFC 5424 format, use the log version command in configuration

mode. By default, the system log version is set to 0.

The following describes the two supported log messages formats:

• 0 – Displays syslog messages format as described in RFC 3164, The BSD syslog Protocol

•

1 – Displays SYSLOG message format as described in RFC 5424, The Syslog Protocol

Example

Dell(conf)#logging version ?

<0-1> Select syslog version (default = 0)

Dell(conf)#logging version 1

show logging auditlog

Displays an audit log.