Users Guide

Usage Information The clear storm-control pfc drop-counters command is used to clears all the ingress & egress drop
counters and time since discard on the specified stack unit and port set.
Related Commands show storm-control pfc status — view the status of the PFC storm on a stack unit with a specific port set.
show storm-control pfc statistics
You can view the statistical details of the PFC storm on a stack unit with specified port set.
Syntax
show storm-control pfc statistics stack-unit {unit-number} port-set {portpipe-
number
Parameters
unit-number Enter the stack unit number.
portpipe-number Enter the port set number.
Defaults None
Command Modes EXEC Privilege.
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6000, S6000–ON, S61000–ON, Z9100–ON.
Usage Information The show storm-control pfc statistics command is used to view the statistical data of the PFC
storm on the specified stack unit and the port set.
Example
Dell#show storm-control pfc statistics stack-unit 0 port-set 0
-----------------------------------------------------------------------
Interface Priority Discard State Discard State Clear Count
Count forced No rxPfc
-----------------------------------------------------------------------
Te 0/0 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 0/1 3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
Te 0/2 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 0/3 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 0/4 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 0/5 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 0/80 3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
Dell#
Storm Control
1505